An ellegant solution to easily removing the Haldex Filter at a price 50% less than existing wrench solutions.

Click for full sized image...

Typical set-up with ratchet and extension

.PDF instructions here

EDM cut out of solid 5mm thick 304 Stainless. Stamped and serialized. New finish improvements for a lifetime of use. Why pay $70 plus for a harder to use tool that seems to always be on backorder? The Stilljester designed H-Wrench is a better solution .

A beautiful and compact design for easy access to that stubborn Haldex filter. Dealers are charging up to $300 for a Haldex service. With the purchase of the H-Wrench, fluid and filter and about 30-45 minutes of your time this servicing can easily be done for less than $100

1) Haldex servicing is recommended every 20,000 miles

2) You will need 1 tube of Haldex fluid and a replacement filter available at your local dealer or through various online sources like ECS Tuning.

3) from under the car, the flilter is located on the driver's side of the Haldex unit (In the UK, Passengers side in the US). See an internal cutaway here.

4) The H-Wrench allows easy filter removal without dropping panels or any other dissassembly

5) The only additional equipment needed is an appropriate 3/8ths extension and ratchet.

6) hit the PDF link above for complete instructions.